anionic polyacrylamide flocculant anionic polymer msds white
fine-white fine-sand shaped powder
Specification
Product Name | Anionic Polyacrylamide /Anionic PAM/APAM |
Item | Anionic type |
Appearance | white fine sand shaped powder or colorless transparent colloid |
Solid% | ≥90% |
Molecular weight | 15million~20million |
Note: our product can be made upon your special request. |
Detailed Product Description
Anionic Polyacrylamide (APAM) can be used widely for Water
treatment, oil drilling, Soil Stabilization and Cement making.
It is a water soluble polymer formed from acrylamide (a compound
with the molecular formula C3H5NO) subunits.
Anionic Polyacrylamide has a big range of high molecular weight
from 05-25 million, with an anionic charge density ranging from
10-60%.
It has medium molecular weight, and medium charge degree.
It is most often used to increase the viscosity of water (creating
a thicker solution) or to encourage flocculation of particles
present in water.
Soluble in water, safe, non-toxic, hydrolytic stability, is not
sensitive to the change of pH value, anti-chlorine. Harmless,
no-flammable and non-explosive, it can be stored at room
temperature, it cannot be placed in the sun. It is slightly acidic,
when skin contact, wash immediately with plenty of water.
Application Field
1. It can be used to treat industrial wastewater and mining
wastewater.
2. It can also be used as an additive of the mud materials in
oil-field, geological drilling and well boring.
Application Method
1. The product should be prepared for the water solution of 0.1% as
concentration. It is better to use neutral and desalted water.
2. The product should be scattered evenly in the stirring water,
and the dissolving can be accelerated by warming the water (below
60℃).
3. The most economical dosage can be determined based on a
preliminary test. The pH value of the water to be treated should be
adjusted before the treatment.
Package and Storage
1. The solid product can be packed in inner plastic bags, and
further in polypropylene woven bags with each bag containing
25Kg.The colloidal product can be packed in inner plastic bags and
further in fiber plate drums with each drum containing 50Kg or
200Kg.
2. This product is hygroscopic, so it is should be sealed and
stored in a dry and cool place below 35
.
3. The solid product should be prevented from scattering on the
ground because the hygroscopic powder can cause slipperiness.
Shipment and package
Packed in Kraft or PE bags with inner plastic bags, with each bag
containing 25kgs, or 750kgs net big bag.
Stored in original packaging in cool and dry place, away from
sources of heat, flame and direct sunlight.
Company Information
1.factory since 1985
2.Main client: world-famous company.
3.Free samples can be sent for you to test
4.export more than 500 metric Ton to foreign country every month
