colorless or light-color sticky liquid decolorant for textile waste
water decolor agent for dyeing waste water treatment
Specifications:
| CAS No. | 55295-98-2 |
| Main Components | dicyandiamide formaldehyde resin |
| Appearance | colorless or light-color sticky liquid |
| Dynamic viscosity (mpa.s,20°C) | 10~200 |
| pH (30% water solution) | <3 |
| Solid content % ≥ | 50 |
| Feature | Cod remove better (about 60%) |
| Note: ourproduct can be made upon your special request. |
Usage:
- Water Decoloring Agent is mainly used for color removal treatment
for high-colority waste water from dyestuffs plants. It is suitable
to treat waste water with activated, acidic and disperse dyestuffs.
- Water Decoloring Agent can also be used to treat waste water from
textile industry and dye houses, pigment industry, printing ink
industry and paper industry.
- Water Decoloring Agent also can be used in the production process
of paper&pulp as retention agent.
Water Decoloring Agent should be diluted with 10-40 times water and
then dosed into the waste water directly. After being mixed for
several minutes, it can be precipitated or air-floated to become
clear water; The pH value of the waste water should be adjusted to
7-10 for better result. When the colority and COD are relatively
high, Water Decoloring Agent can be used with the help of poly
aluminum chloride, but not mixed together. In this way, the
treatment cost can be lowered.
Application method and notes:
1. CW-08 shall be diluted with 10-40 times water, then added to the
wastewater directly. After stirring for several minutes, the clear
water will be got by precipitation or air-floatation.
2. Accepted the optimized pH of the wastewater to 6-10.
3. It is recommended to use this product with the inorganic
flocculants to treat the effluent with high color and COD to reduce
the operation cost. The order and proportion of agent dosage depend
on the flocculation test and the effluent treatment process.4. The product is nonflammable and unexplosive.
5. CW-08 would show layer separation and become white at low
temperature. There is no negative impact on the usage after mixing
up.
Advantage:
1.Strong decolorization
2.It can remove COD better(about 60%)
3.Faster sedimentation, better flocculation
4.Non-pollution(no aluminum, chlorine, heavy metal ions ect.)
Package and Storage:
1. Harmless, non-flammable and non-explosive.Don't place it in the
sun.
2. 30kg, 50kg, 250kg ,1000kg, 1250kg plastic drums or IBC tankor.
Also can according to your requirements.
3. This product will appear layer after a long-term storage, but
the effect will not be affected with stir. Storage temperature:
5-30°C
